KoldFront KIM450S Manuel d'utilisateur télécharger pdf (Page 8)

Electrical Requirements

Before you move your icemaker into its final location, it is important to

make sure you have the proper electrical connection:

A standard electrical supply (115 V, 60Hz.), properly grounded in

accordance with the National Electrical Code and local codes and

ordinances, is required.

It is recommended that a separate circuit, serving only your icemaker, be

provided. Use receptacles that cannot be turned off by a switch or pull

chain.

The fuse (or circuit breaker) size should be 3 amps.

Recommended grounding method

For your personal safety, this appliance must be grounded. It is

equipped with a power supply cord having a 3-prong grounding

plug. To minimize possible shock hazard, the cord must be plugged

into a mating 3-pronged and grounding-type wall receptacle,

grounded in accordance with the National Electrical Code and local

codes and ordinances. If a mating wall receptacle is not available, it

is the personal responsibility of the customer to have a properly

grounded, 3-prong wall receptacle installed by a qualified

electrician.

Electrical Shock Hazard

Plug into a grounded 3-prong outlet.

Never remove the grounding prong from the plug.

Never use an adapter.

Never use an extension cord.

Failure to follow these instructions can result in fire,

electrical shock, or death

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Pas de commentaire

KoldFront KIM450S Manuel d'utilisateur Page 8